The Swift Soffit Entry Plate.
Our newest product the Swift Soffit entry plate, is perfect for you to start saving the swifts.



Description.
A number of considerations had to be taken in for a bespoke entry plate to work well for the Swifts. First, the hole size and shape must be correct, 65mm x 30mm. Next the approach angle must be beneficial for the fast flying Swifts, so we settled on 30 degrees. This means that even the most dextrous birds don't have to attempt a shear vertical entry. Then there is the question of grip for the claws of the Swifts in order to drag themselves into the above soffit space. To facilitate this we have incorporated our time proven wooden entry ring.

Simple installation.
Modern soffit boards are made of 10mm thick plastic which does not rot like the old wooden ones. Neither will our new fiberglass entry plates ever rot, so a good match it must be said. We have also covered the safety aspect by supplying short fixing screws because anything too long would protrude beyond the soffit board and injure the Swifts. Finally we include a small wooden template for installers to mark out the precise size of hole to cut into the soffit board. The plate allows the customer to create a very long life nest site inside the vacant soffit board cavity for the Swifts. I sent a sample to Edward Mayer who is the UK's expert on the Swifts. Edward said that it is perfect and that I should start marketing them straight away.
